Specification:
| Code | IG586 |
| Name | Silver nanowires conductive ink |
| Formula | Ag |
| CAS No. | 7440-22-4 |
| Diameter | <30nm; <50nm; <100nm |
| Length | ＞10um; >20um |
| Purity | 99.9% |
| Appearance | Grey liquid |
| Potential applications | Ultra-small circuits; flexible screens; solar batteries; conductive adhesives and thermal conductive adhesives, etc. |
Description:
Conductive ink performance indicators:
Silver nanowire conductive ink, solvent is deionized water, solid content of 3‰.Viscosity at 25 ° C is 3-10CP.It can be coated with 30-250 ohm square resistance.
1kg conductive ink can be coated with an area of 30-150m2.The coating thickness is 40-200 microns.
Product features:
Good electrical conductivity, flexibility and adhesion
Environmental friendly, non-toxic, water-based system
High light transmittance and low haze
Base material that can be coated:
PET, PI, CPI, glass, etc
Main application fields:
1. Touch panel
2. Smart appliances
3. Technical application of wearable devices
4. Antistatic coating, film switch, etc
Notes when using:
1. Before use, the ink will be slowly mechanically stirred evenly, and ensure the uniformity in the printing process.
2. The film thickness directly affects the haze, light transmittance, square resistance and other indicators after film formation;
3. can be stored at room temperature, recommended storage temperature 5-15℃, the use of ultrasonic vibration is strictly prohibited;
4. After film-forming, the substrate can be washed with pure water, and it is strictly prohibited to wipe and ultrasonic vibration.
Storage Condition:
Silver nanowires conductive ink should be stored in sealed, avoid light, dry place. Room temperature storage is ok, but recommended storage temperature is 5-15℃.
SEM & XRD :
