Home Categories Send inquiry

News

Single-Walled Carbon Nanotubes (SWCNTs) used in various batteries

Single-Walled Carbon Nanotubes (SWCNTs) are widely used in various types of batteries. Here are the battery types in which SWCNTs find application: 1) Supercapacitors: SWCNTs serve as ideal electrode materials for supercapacitors due to their high specific surface area and excellent conductivity... Read More

Tungsten-doped vanadium dioxide(W-VO2) phase transition temperature and application

The phase transition temperature of tungsten-doped vanadium dioxide (W-VO2) mainly depends on the tungsten content. The specific phase transition temperature may vary depending on experimental conditions and alloy compositions. Generally, as the tungsten content increases, the phase transition te... Read More

Antimony doped Tin Dioxide Nano Powder（ATO） for Semiconductor Materials

Antimony doped tin dioxide nano powder (ATO) is a material with semiconductor properties. As a semiconductor material, it has some of the following semiconductor properties:   1.  Band gap: ATO has a moderate band gap, usually around 2 eV. The size of this gap allows it to perform well as a semic... Read More

Iron Nanoparticles(ZVI) in agriculture application

Iron Nanoparticles(ZVI，zero valence iron,HONGWU) in agriculture application With the continuous advancement of science and technology, nanotechnology has been widely used in various fields, and the agricultural field is no exception. As a new type of material, iron nanoparticles have many excell... Read More

Nano titanium dioxide TiO2 used as anti-UV material, anatase or rutile?

Ultraviolet rays are one of the important components of sunlight, and their wavelengths can be divided into three bands. Among them, UVC is a short wave, which is absorbed and blocked by the ozone layer, cannot reach the ground, and has no harmful effect on the human body. Therefore, UVA and UVB ... Read More

Iron nickel cobalt alloy(Fe-Ni-Co) nano powders applied in catalysis

Why can nano iron nickel cobalt alloy particle be widely used in the field of catalysts? The special structure and composition of iron nickel cobalt alloy nano material endow it with excellent catalytic activity and selectivity, allowing it to exhibit excellent performance in a variety of chemica... Read More

Nano silver applied for heat exchange

High -power device produces large heat during working. If it is not exported in time, it will seriously reduce the performance of the interconnected layer, which will affect the performance and reliability of the power module.   Nano silver sintering technology is a high -temperature packagi... Read More

Application of TiO2 Titanium Dioxide Nanotubes in Photoreaction

TiO2 Titanium dioxide nanotube (HW-T680) is nanomaterial with unique structures and excellent optical properties. Its high specific surface area and one-dimensional channel structure make it widely used in the field of photoreaction. This article will introduce the preparation methods of titanium... Read More

Silicon Carbide Whiskers SICW for Modification of Epoxy Resin

Epoxy resin (EP) is one of the most widely used thermal solid polymer materials. It has the characteristics of excellent adhesion, thermal stability, electrical insulation, chemical resistance and high strength, low contraction rate, low price, etc. It is widely used in various fields such as coa... Read More

Nano gold colloidal and immune gold marking technology

Nano gold colloidal and immune gold marking technology Nano gold colloidal is gold-soluble gel with a diameter of the dispersed phase particles at 1-100 nm. Nano gold colloid for sale Immune gold marking technology is a technology that forms an immune gold composite with many protein marks, incl... Read More

Nano Zirconia ZrO2 has great development potential in electronics field

Nano Zirconia ZrO2 has excellent performance, wide application fields, and great development potential in the field of consumer electronics. Nano Zirconia ZrO2 has excellent physical properties such as high strength, high temperature resistance, wear resistance, insulation insulation, and expansi... Read More

the difference between pure vanadium oxide & doped W-VO2 with phase transition temperature

Windows contribute as much as 60% of the energy lost in buildings. In hot weather, the windows are heated from the outside, radiating thermal energy into the building. When it is cold outside, the windows heat up from the inside, and they radiate heat to the outside environment. This process is c... Read More

Nano Silicon Carbide Properties of Polishing and Grinding

Polishing and Grinding Properties of Nano Silicon Carbide Nano Silicon carbide powder (HW-D507) is produced by smelting quartz sand, petroleum coke (or coal coke), and wood chips as raw materials through high temperature in resistance furnaces. Silicon carbide also exists in nature as a rare mine... Read More

Nano Platinum and Platinum Carbon for Catalyst use

Platinum group metals include platinum(Pt), rhodium(Rh), palladium(Pd), ruthenium(Ru), osmium(Os), and iridium(Ir), which belong to precious metals as gold(Au) and silver(Ag). They have extremely strong atomic bonds, and thus have great interatomic bonding force and maximum bulk density. The atom... Read More

Metal & Oxide Nanoparticles used for nano sensors

A nanosensor is a type of sensor that detects tiny physical quantities and is typically made of nanomaterials. The size of nanomaterials is generally smaller than 100 nanometers, and compared to traditional materials, they have better performance, such as higher strength, smoother surface, and be... Read More

Single-walled carbon nanotubes (SWCNTs) are an advanced additive enhancing base materials

Single-walled carbon nanotubes (SWCNTs) are an advanced additive used to enhance the properties of base materials, benefiting from their ultra-high electrical conductivity, weight ratio, high temperature resistance, high strength and elasticity. It can be used to produce high performance elastome... Read More
123456 Next > >> Page 1 / 6